•
When “On” is selected for “Stream transmission” for “Stream(1)”, “Stream(2)”, or “Stream(3)”, the
refresh interval of JPEG images is limited to a maximum of 3fps(30fps mode) or 3.1fps(25fps mode).
[Internet mode]
Select “On” when transmitting H.265 images via the Internet. It is possible to transmit stream without changing
the broadband router settings configured for JPEG image transmission.
•
On:
H.265 images will be transmitted using the HTTP port. Refer to page 122 for further information about
the HTTP port number settings.
•
Off:
H.265 images will be transmitted using the UDP port.
•
Default:
Off
Note
•
When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
•
When “On” is selected, it may take time to start displaying stream images.
•
When “On” is selected, stream images may not be displayed depending on the number of the
concurrent access user, etc.
•
When “On” is selected, only IPv4 access is available.
[Image capture size]
Select the image capture size from the following. What can be selected may be limited depending on the image
capture size already selected.
U154x
U254x
U114x
U214x
Image
capture
mode
Stream(1)
Stream(2)
Stream(3)
16:9 (30fps
mode)/16:9
(25fps mode)
2560
´
1440
1920
´
1080
640
´
360
320
´
180
1920
´
1080
640
´
360
320
´
180
640
´
360
320
´
180
•
Default:
–
Stream(1): 2560
´
1440
–
Stream(2): 640
´
360
–
Stream(3): 320
´
180
U153x
U253x
U113x
U213x
Image
capture
mode
Stream(1)
Stream(2)
Stream(3)
16:9 (30fps
mode)/16:9
(25fps mode)
1920
´
1080
1280
´
720
640
´
360
320
´
180
1280
´
720
640
´
360
320
´
180
640
´
360
320
´
180
4:3 (30fps
mode)/4:3
(25fps mode)
1600
´
1200
1280
´
960
VGA
QVGA
1280
´
960
VGA
QVGA
VGA
QVGA
•
Default:
–
Stream(1): 1920
´
1080
–
Stream(2): 640
´
360
Operating Instructions
67
2 Settings
