2.3.2.6 Schedule: Configure SD recording (schedule function type
setup menu)
The recording format for scheduled SD memory recording can be selected on this section.
[Trigger]
•
SD memory recording:
Records the H.265 image in the SD memory card at the scheduled time.
[Recording format]
“Stream(1)”, “Stream(2)”, or “Stream(3)” can be selected for the recorded image.
[Next] button
If you click the [Next] button, the video recording setup menu will be displayed. (
®
Note
•
If you click the [Next] button, the setting items in the screen are saved.
[Back] button
If you click the [Back] button, the event function type setup menu will be displayed. (
2.3.2.7 Schedule: Set SD memory recording (video recording setup
menu)
Here, SD memory recording is configured according to the schedule.
[Frame rate*]
Select a frame rate for the H.265 to be recorded from the following.
–
When 30fps mode is selected for [Image capture mode]:
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
–
When 25fps mode is selected for [Image capture mode]:
1fps/ 3.1fps/ 4.2fps*/ 6.25fps*/ 8.3fps*/ 12.5fps*/ 20fps*/ 25fps*
Default:
30fps*
Note
•
If you click the [Next] button, the “Transmission priority” will be set to “Frame rate”. (
®
The bit rate is set as follows depending on the selected image capture size and frame rate.
46
Operating Instructions
2 Settings
