2.5.3 Configure the settings relating to Stream [Image]
Click the [Image] tab on the “Image” page. (
®
For menu display and how to operate, refer to page 34,
page 34)
Configure the settings relating to H.265 image such as “Max bit rate (per client)”, “Image capture size”, “Image
quality”, etc. in this section. Refer to page 64 for the settings relating to JPEG images.
Note
•
When the language setting of the browser selected at the time of administrator registration is Japanese,
the default settings of some of the stream-related settings are different. Refer to “About the user
manuals”.
•
When [Image rotation] is set to “90 °” or “270 °”, the following settings for Stream(1) cannot be set
simultaneously.
U154x
U254x
U114x
U214x
–
[Image capture size]: 2560x1440
–
[Frame rate*]: “20fps*” or more
–
[GOP control]: On(Advanced)
Stream(1)/ Stream(2)/ Stream(3)
[Stream transmission]
Select “On” or “Off” to determine whether or not to transmit H.265 images.
•
On:
Transmits H.265 images.
•
Off:
Does not transmit H.265 images.
•
Default:
On
Note
•
If “On” is selected for “Stream(2)” or “Stream(3)”, the maximum frame rate changes as follows
depending on the setting of “Image capture mode”:
–
16:9 (30fps mode)/4:3 (30fps mode): 15fps*
–
16:9 (25fps mode)/4:3 (25fps mode): 12.5fps*
•
When “On” is selected for “Stream transmission” in “Stream(1)”, “Stream(2)”, or “Stream(3)” displaying
of H.265 images or JPEG images on the “Live” page will become available.
66
Operating Instructions
2 Settings
