15
Charging a rechargeable battery
1
Turn off all microphones.
2
Connect the power cable to the input terminal of the battery charger (WX-LZ150).
3
Connect the power plug of the power cable to the AC outlet.
4
Connect the DC plug of the charger to the DC input terminal of the microphone.
Insert the DC plug into the DC input terminal with the side marked with a triangle oriented
to the battery cover at the side of the microphone.
To charge two microphones at the same time, connect one DC plug each to the DC input
terminals. To charge one microphone at a time, leave the free DC plug lying nearby.
After connecting the microphone to the charger, the charge indicator (red) indicates the
charging status as follows:
ON:
Charging.
OFF:
Charging completed, or no battery installed.
Blinking:
Indicates one of the following conditions.
• A dry cell or deteriorated rechargeable battery is installed. Install a rechargeable bat-
tery instead of a dry cell, or a new rechargeable battery.
• The temperature of the battery may be out of the acceptable range. Confirm that the
temperature is within the acceptable range.
5
When charging is completed, disconnect the power plug from the AC outlet.
Input terminal
WX-LT150
CHG
BATT
ON
To AC outlet
Power plug
2
Charge indicator
DC plug
Power push-button switch
Power switch
DC plug
4
1
3
5
DC input
terminal
Battery Charger
WX-LZ150
Power cable
(Plug type differs depending
on the locality.)
3TR006021BZA̲WX-LT150 09.5.22 04:08 PM ページ15