background image

18

• Are several microphones being

used in close proximity? 

Move the microphone further
away. 

• Is the microphone in use in a loca-

tion very close to the infrared sen-
sor? 

Move the microphone further
away. 

• Are there any other infrared devices

or noise sources in use nearby? 

Reduce the distance between
microphone and infrared sen-
sor. 

• Are the battery contacts/poles dirty? 

Clean the battery contacts/
poles. 

• Is the transmitting channel of he

microphone matched to the receiv-
ing channel of the receiver? 

Set the transmitting channel of
the microphone to a receiving
channel of the receiver used. 

• Is the channel select switch in a

position where it has firmly clicked
into place? 

Check the position of the chan-
nel select switch. 

Interference

Continuous noise

No reception at all
(No audio output from
the receiver, or reception
indicator does not
respond)

Symptom

Ref. pages

Cause/solution

5

5

5

4

10

10

• Is more than one microphone

assigned to the same channel? 

• Assign a channel (frequency) that is

not used by another microphone.

10

3TR006021BZA̲WX-LT150  09.5.22  04:08 PM  ページ18

Summary of Contents for WX-LT150

























Reviews: