background image

21

Specifications

Infrared wave length

850 nm

Transmitting channel 
(subcarrier frequency)

1 frequency from 4 selectable frequencies (CH1: 2.30 MHz,
CH2: 2.80 MHz, CH3: 3.20 MHz, CH4: 3.80 MHz)

Tone signal

32.768 kHz

Oscillating system

Crystal control PLL synthesized system

Coverage distance

Approx. 20 m {66'} (line-of-sight distance along the optical
axis)
[Using Infrared Receiver (WX-LR100) and Infrared Sensor
(WX-LS100), CH1]

Effective reception range

Approx. 8 m {26'} in radius [from Infrared Sensor (WX-LS100)]

Modulation sensitivity

±12.5 kHz FM (in 90 dB SPL 1 kHz)

Max. modulation sensitivity

±40 kHz FM

Microphone type

Unidirectional electret condenser microphone

Frequency response

100 Hz - 10 kHz (50 µs emphasis on 1 kHz basis)

External input

–14 dBV ø3.5 stereo mini jack (monaural mix)

Required batteries

Rechargeable battery: Nickel metal hydride battery of AA size
(2 000 mAh to 2 100 mAh) x 1 pc.
Dry cell: Alkaline battery of AA/LR6 size x 1 pc.

Battery life (Duration)

(At 25 °C normal temperature for continuous use)
Around 6 hours (Battery indicator: Green light and orange
light when using Panasonic's nickel metal hydride batteries of
HHR-3M Series)
Around 5 hours (Battery indicator: Green light and orange
light when using Panasonic's Alkaline batteries of LR6EJ
Series)

External power supply

3.3 V DC (Supplied from the optional Battery Charger 
WX-LZ150)

Operating temperature range

5 °C - 35 °C {41 °F - 95 °F}

Dimensions

41mm (W) x 37 mm (L) x 207 mm (D)
{1-5/8"(W) x 1-15/32"(L) x 8-5/32"(D)}

Weight

Approx 105

g

{0.23 lbs.} (excluding battery)

Finish 

Microphone head: black coating

Grip

Silver metallic coating

Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.

3TR006021BZA̲WX-LT150  09.5.22  04:08 PM  ページ21

Summary of Contents for WX-LT150

























Reviews: