30
Carefully read the “Precautions” section and follow all of its instructions.
Turn the microphone OFF before replacing the battery.
In the following cases, the dry-cell battery is depleted or remaining capacity of the
rechargeable battery is insufficient. Replace the dry-cell battery with new one or recharge
the rechargeable battery.
The [PWR] indicator lights red
The [PWR] indicator does not light up
memo
Important
Do not touch the battery poles with your hands. Doing so may cause
connection problems or noise. If the battery poles become dirty, clean them
with a dry, soft cloth.
Even when the power is turned OFF, the battery left inside the product will
slowly be drained. Remove the battery when you are not using the
microphone for an extended period of time, as failing to do so may cause
battery leaks.
3
Battery
(locally procured)
2
Loosen
4
Tighten
Battery cover
1, 5
Power indicator
Power switch
Microphone unit
1
Make sure that the [PWR] indicator is off
2
Remove the battery cover
Turn the battery cover to the left and slide it downwards to remove it.
3
Replace the battery
When removing battery, take them out from the positive pole.
Check the polarity of the battery (positive and negative ), and insert either one
rechargeable Ni-MH AA-type battery or one AA-type alkaline dry-cell battery in the
battery slot according to the polarity indication ( , ).
Replacing the battery
PGQX2326UAV6_WX-ST200_OI_en-fr.indb 30
2022/01/24 11:18:01