WIRELESS USER GUIDE (BLACK MODEL)
Note: The
TALK
button is represented by a silver button depicting a small green
handset. The
HANG-UP
button is represented by a silver button depicting a
small red handset. The
SCROLL
button is the silver button in between these two
buttons with 4 small arrows.
Important: If wireless battery is permitted to completely run out, the unit will not
operate again after recharge unless first powered up. To power up, press and
hold the HANG-UP button for at least 5 seconds.
PLACING A CALL
1)
Press the green
TALK
button.
2)
The system will provide you with a free line.
3)
Dial the phone number you desire.
ANSWERING A CALL
1)
While the phone is ringing, press the green
TALK
button.
2)
Speak to the caller.
SPEAKERPHONE
1)
At any time, press the
TALK
button once for a normal call, twice for a
speakerphone call, or three times for a monitor call (muted speaker).
PLACING A CALL ON HOLD
1)
While on a call, press the
HOLD
button.
2)
The call will be placed on hold. You can take the call off hold on any
phone.
3)
Press the red
HANG-UP
button to hang up the wireless phone.
RETRIEVING A CALL THAT IS ON HOLD
1)
Press the
INFO
button once to see the status of the lines. Lines in use will
be indicated with a bracket around the line number. Lines on hold will be
indicated by a set of flashing brackets.
2)
Press the desired line button.
3)
Speak with the caller.
4)
Note: If the desired line is not displayed, press the
INFO
button repeatedly
until the desired line is displayed.
SELECTING A SPECIFIC LINE
1)
If the desired line is featured on the display, press the line button.
2)
If the line is not featured on the display, press the
INFO
button
repeatedly to cycle thorough the available lines. Once the line is
displayed, press the desired line button.
PLACING AN INTERCOM CALL
1)
Press the
FUNC
button.
2)
Dial 1 (Note the word INT in white next to the digit 1).
3)
Dial the appropriate extension number.
