PANASTEREO CX230 CINEMA MONITOR
PANASTEREO CX230 CINEMA MONITOR
PANASTEREO CX230 CINEMA MONITOR
PANASTEREO CX230 CINEMA MONITOR
47. Select the pink noise generator to RIGHT SURROUND.
48. Check the SPL reading on the RTA. It should be 85dB. If not, check the B-Chain alignment of
the sound processor.
49. Select the “SOURCE” switch to “AMPS”, and select “RIGHT SURROUND”.
50. Adjust the “AMPLIFIERS - RS” trimpot so that the CX230 sound level meter reads 85db.
51. Select the “SOURCE” switch to “PROC”.
52. Adjust the “Processor - RS” trimpot so that the CX230 sound level meter reads 85db.
The CX230 alignment is now complete.
