PANASTEREO CX230 CINEMA MONITOR
PANASTEREO CX230 CINEMA MONITOR
PANASTEREO CX230 CINEMA MONITOR
PANASTEREO CX230 CINEMA MONITOR
17. Select the pink noise generator to LEFT.
18. Check the SPL reading on the RTA. It should be 85dB. If not, check the B-Chain alignment of
the sound processor.
19. Select the “SOURCE” switch to “AMPS”, and select “LEFT”.
20. Adjust the “AMPLIFIERS - LL” trimpot so that the CX230 sound level meter reads 85db.
21. Select the “SOURCE” switch to “PROC”.
22. Adjust the “Processor - LL” trimpot on the monitor so that the CX230 sound level meter reads
85db.
23. Select the pink noise generator to RIGHT.
24. Check the SPL reading on the RTA. It should be 85dB. If not, check the B-Chain alignment of
the sound processor.
25. Select the “SOURCE” switch to “AMPS”, and select “RIGHT”.
26. Adjust the “AMPLIFIERS - RL” trimpot so that the CX230 sound level meter reads 85db.
27. Select the “SOURCE” switch to “PROC”.
28. Adjust the “Processor - RL” trimpot so that the CX230 sound level meter reads 85db.
29. Select the pink noise generator to LEFT SURROUND.
30. Check the SPL reading on the RTA. It should be 85dB. If not, check the B-Chain alignment of
the sound processor.
31. Select the “SOURCE” switch to “AMPS”, and select “LEFT SURROUND”.
32. Adjust the “AMPLIFIERS - LS” trimpot so that the CX230 sound level meter reads 85db.
33. Select the “SOURCE” switch to “PROC”.
34. Adjust the “Processor - LS” trimpot so that the CX230 sound level meter reads 85db.
