relatively simple one and basically consists of choosing a source and a destination. There
are then a few choices to be made which alter how and to what degree the source
modulates the destination. This will all be explained below later.
The four Flexi Controllers are situated towards the right in the upper portion of the Editor
screen. Each has a different color to distinguish it from the others but all are identical in
function.
The panel of each Flexi Controller has four windows and a pushbutton and these are as
follows:
●
MODE (QUANTIZE/CONTINUOUS):
Click this window to select whether the control source modulates the destination
parameter either smoothly or in quantized steps.
e.g. If the destination is PITCH COARSE then CONTINUOUS will adjust the pitch
smoothly, whereas QUANTIZE will adjust it in semitone steps.
●
SOURCE:
Click this window to open a pop-up menu with the list of
Control Sources
:
Click on a source to select it. The menu will close automatically.
To close the menu without selecting a source, click on the
X
or anywhere in the
panels above the menu screen.
Aside from the bottom five, the yellow sources in the left column are
internal
; the
rest are
external
. The MIDI sources in white have a
within the
FI (shown in brackets). Internal and external sources are discussed
.
59