Cut ur Prize
5
5) Error state Please refer to the Flow Chart below for details:
:
TURN ON THE POWER
Before turning on the power, please check the plug and cord, and make sure that the game is set to the proper voltage.
GAME PLAY MODE
When the Game is started, the TIME and CREDIT LED on the console display the time and credit the player has. There is also
MUSIC going with this.
ATTRACT MODE
In ATTRACT MODE, the LEDs on the console display
X
X
, which also changes continuously. It is also going with
music. Press the “TEST” button on the front cabinet for over 300mss and the game will enter into TEST MODE. Insert Coin,
and the machine will enter into GAME PLAY MODE.
TEST MODE
Test whether the LED is in good conditions, whether the lights, claw carriage and music are in working conditions. When
machine is in ATTRACT MODE, press the “TEST” button, music will stop and the game will enter into “TEST MODE”.
LED displays No of version
→
LED all turn off
→
LED all turn on
→
Testing Input
→
Testing Output
→
Testing Ticket
Dispenser (Not applicable to this Machine)
→
Testing Music
→
Test is completed.
ERROR MODE
During the game play, whenever there is ERROR, the system will enter into ERROR MODE. The Error code “EX” will be
displayed. Alarm is activated, and you can check the errors according to the EROR CODES 1, 2, 3, 4, 5, 6 and 8.. After
clearing the error, reset the game and restart the machine. Please refer to the “ERROR CODES” table for details.
Te
st
c
o
m
p
le
te
d
Syst
em
Err
or
Game ends
Insert coin or press Service
button
Press Reset button on
main
System
E
Play Mode
Turn on Power
Attraction mode
Press Test button to
start testing
Test Mode
Error Mode
PANDA
VENDING
LIMITED
