23
The scan is searching for channel signals within range or channels that are available through your
cable connection. When the scan is complete, a list is created of channels with signals strong enough
to recognize. However, some channels that are added to the list still may not have signals strong
enough for clear viewing.
When you use the
CH+
and
CH-
buttons to scroll through the channels, the only the channels that will
be displayed are those on the scan list. If you want to view a channel that is not on the scan list, you
can use the number pad and manually enter the channel number you want to view.
(Refer to
Browsing Shortcuts on page 32 for more information.)
When the scan finishes you can begin to watch TV.
Note
: The KTC’s tuner is designed for HDTV therefore requires a stronger signal than normal
TVs. If you cannot achieve that signal level with your digital cable, your KTC might lose
picture or sound.
Not all broadcasts are in High Definition (HD). Refer to your local broadcasting stations for
more information.
On Screen Display (OSD) Menu
You can adjust many of the OSD menu options by using either the remote control or the side panel buttons on
your KTC, although in most cases the remote control is recommended for ease of use.
Press
MENU
to display the OSD menu.
OSD Menu Options Overview
VIDEO
Change the screen picture settings for all ports:
Tint, Contrast, Sharpness, Brightness,
Saturation, and Color Temperature
AUDIO
Change sound settings for all ports:
Treble, Bass, and Balance
