48
Mass Storage
Built-in 128MB NAND Flash
Feed
Wand
Scanner
Manual with ScanRite
TM
Technology
Feeder
Dock
Twin Roller
Power
Scanner
Lithium Ion NP-45 rechargeable battery pack included
. (Battery
performance varies by original size and various scanner settings; refer
to page 9.)
When the scanner is
off
and engaged in the feeder dock, the feeder
dock charges the rechargeable battery.
Feeder
Dock
AC Adapter - Input 100-240V AC, 50/60 Hz,Output 5V, 1.0A
Recommended
Operating
Environment
Operating
5ºC ~ 35ºC
(59
o
F~95
o
F)
Storage
-20ºC ~ 60ºC
(-4
o
F~140
o
F)
Humidity
Operating
20% ~ 70% RH
Storage
10% ~ 90% RH
Dimensions (approximate)
Scanner = 10.35x1.5x1.4inches
(263x39x36mm)
Feeder Dock = 12.8x1.77x1.42
(325x45x36mm)
Scanner Docked = 12.8x2.09x2.68
(325x53x68mm)
Net weight
Scanner Docked = 14.5 oz
(410g)
Li-‐ion Battery Care
Danger Warning:
To prevent the possibility of the battery leaking, overheating or explosion, please observe the following
precautions:
Do not immerse the battery in water or seawater. Keep it in a cool and dry environment when not using.
Do not discard or leave the battery near a heat source such as fire or heater.
Use the battery microUSB adapter with the microUSB cable for charging the battery.
Do not reverse the positive and negative terminals.
Do not connect the positive and negative terminal directly with metal objects such as wire. Do not short
out the battery terminals as it may damage the battery.
Do not transport and store the battery along with metal objects such as necklaces or hairpins.
Do not strike, throw or trample the battery. Do not directly solder the battery or pierce the battery with a
nail or other sharp object.
Do not use damaged cells. Do not bend, fold, open or deform sealing edge. Do not cut the end of the
folding edge.
Do not drop, hit or bend the battery. Never disassemble the battery cells.
Keep the battery away from children.
Battery Cautions:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
local recycle regulations.
Never place battery on or in heating devices, such as microwave ovens, stoves or radiators. Battery
may explode when overheated or its performance will be degenerate and its service life will be
decreased.
Do not use the battery in a location where electrostatic and magnetic forces exist. Otherwise the safety
devices may be damaged causing safety issues.