Accumulations of grease de-
posits can cause fires. Never
use the hood without the anti-
grease filter.
- The installation must respect
the norms in force regard-
ing the ventilation of closed
rooms.
In practice, the air extracted
must not pass through a tube
used for discharging fumes
from appliances that utilize
gas or other combustibles
(central heating systems, etc.).
- Ventilate the environment
correctly if the hood functions
simultaneously with other ap-
pliances fed by a different en-
ergy source so that the hood
does not extract mixed gases.
Attention!
Maximum care
must be taken to ensure that
the hood does not absorb part
of the air destined for combus-
tion during the simultaneous
functioning of the hood with
an “extraction system” and a
heating system dependent on
the ambient air (heaters that
use gas, oil, coal, chimneys,
etc.) because it could cause an
accumulation of carbon mon-
oxide in dangerous quantities
in the room or the home which
could cause death. If an ex-
traction hood is installed only
or connected to a combustion
element such as a stove,
a chimney or a room heating
system, it is compulsory to
contact the manufacturer and
the installer of these elements
to have an optimal function-
ing without any risk.
- Maintain a maximum am-
bient pressure of 0.04 mbar.
This condition permits an
excellent functioning of the
hood. To obtain this type of
ambience, permanently main-
tain the air inlet open to avoid
blocking the passage of air (it
is advisable to install an aera-
tion grill). Leaving windows
and doors open is not the
right solution.
- The electricity mains sup-
ply must be stable and in
line with the indicated elec-
trical requirements (refer to
the plate with the character-
istics of the appliance). If the
electricity mains supply is not
stable and there were varia-
tions of voltage, intensity or
frequency, harmonic distor-
tion, transitory currents, volt-
age drops, overloads, tempo-
ral variations, etc., the hood
could malfunction or have a
fault and the repair would not
be covered by the guarantee.
In this case, it will be neces-
sary to disconnect the hood
and contact an electrician or
the electricity company to re-
23
Summary of Contents for E-215/110X70
