INOXPAN S.L.
121
7 BEFORE CALLING AFTER-SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper
levels or if a problem occurs with the appliance. Warning codes are displayed in the freezer
and cooler indicators.
ERROR TYPE
MEANING
WHY
WHAT TO DO
E01
Sensor warning
Call Service for assistance as
soon as possible.
E02
Sensor warning
Call Service for assistance as
soon as possible.
E03
Sensor warning
Call Service for assistance as
soon as possible.
E06
Sensor warning
Call Service for assistance as
soon as possible.
E07
Sensor warning
Call Service for assistance as
soon as possible.
E08
Low Voltage Warning
Power supply to the device
has dropped to below
170 V.
- This is not a device failure, this
error helps to prevent damages
to the compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs to be
contacted.
E09
Freezer compartment
is not cold enough
Likely to occur after long
term power failure.
1. Set the freezer temperature
to a colder value or set Super
Freeze. This should remove
the error code once the
required temperature has been
reached. Keep doors closed
to improve time taken to reach
the correct temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment
until the correct temperature
has been reached and the
error is no longer.
If this warning continues an
authorised technician needs to be
contacted.
FRIDGE - FREEZER
Summary of Contents for PFBI COMBI 178x54
Page 126: ...INOXPAN S L E...
Page 127: ...INOXPAN S L E...