Respect the vents described in the images, as failure to do so may result in serious
damage to the product, which would not be covered by the warranty.
*
**
**
Separating shelf
for optimal heat
insulation and
ventilation
*
The joint between the hob and the worktop must
not be made with sealants or silicone. The use of
such products in the installation may damage the
product and make access or removal difficult f o r
servicing. Damage or costs resulting from non-
compliance will not be covered by the warranty.
covered by the product warranty.
Glass on worktop
FITTING DIMENSIONS MODEL - 3110
*Dimensions in mm
The perimeter trim must be made with the gasket
included in the product by gluing it to the bottom flange of
the plate 2 mm from the outer edge, after the protective
film has been removed.
Glass size
Size of the cut
Minimum distance
Glass
thickness
Total
product
height
A1
B1
C
D
E
F
G
H
520
590
495
565
50
50
4
60
GB
27
Summary of Contents for PI-3110
