Peripheral device, designed to expand the functional of the Pandora security system. It has a digital control
channel for a Webasto Thermo Top Evo and Eberspacher Hydronic 1/2/3 engine heaters, two programmable
inputs and a programmable relay.
COMPATIBILITY
The BT-02 is fully compatible with Pandora security systems with Bluetooth modem firmware v4.11
and higher: Pandora Elite v.2, Pandora Smart Pro v.3.
SPECIFICATION
Nominal voltage:
+12V
Current consupmtion of the relay:
<1mA
Switching current of the built-in relay:
min 10mA, nom 1A, max 2A
2,4 GHz radio protocol:
Bluetooth 4.2 Low Energy
Degree of protection:
IP64
Operating temperatures:
from -40°C to +85°C
Dimensions:
34x16x9
Radio relay BT-02
DO NOT SHIELD!
Antenna 2,4 GHz
nom 1A
max 2A
4 5 6
9 10 11
1
2
3
4
5
6
7
8
9
10
11
red
brown
white
green/black
green/red
green
black
green/yellow
blue/black
blue/red
blue
}
nom 1A
max 2A
}
Connect
for programming
POWER 12V
GROUND
LIN/
PROGRAMMING
IN BT1 (-)
IN BT2 (-)
CH BLE R1 – NC2
CH BLE R1 – COM2
CH BLE R1 – NO2
CH BLE R1 – NC1
CH BLE R1 – COM1
CH BLE R1 – NO1
PROGRAMMING
1. Enter the programming level №10.7 (see “Programming table” section of the system manual)
or use the “Pairing” function in the Pandora Specialist mobile app (go to “Advanced mounting”->
“Bluetooth”-> ”Pairing, unpairing devices”).
2. Connect the wire №1 (red) to a re12V power supply.
3. Connect the wire №7 (black) with the wire №8 (green/yellow). Connect them to the grounded spot
of a vehicle.
4. The Siren/Beeper will confirm successful pairing by a sound signal.
5. Disconnect the wire №8 (green/yellow), insulate all unused wires.
