11
User manual
If there were new alarming events during the time system was armed, siren will sound 4 times,
and turn signals will flash 4 times, the remote will sound ‘WARNING!’ ringtone (after ‘DISARMING’
ringtone) and will indicate zones triggered. All recent alarm events can be viewed in the event history.
Emergency disarming
In case you cannot disarm the system using a remote, use special service PIN-code:
Factory preset PIN-code is 1-1-1-1. Use VALET button to input PIN-code.
Entering PIN-code is available only if the ignition is switched
off.
1. Using VALET button, input the first digit of the code
(press the button a number of times, equal to the first digit;
pauses between presses should not exceed 1 second). The
system will confirm with red LED indicator flash.
2. Use the same procedure to input the second, third and fourth digit. Every input will be
confirmed with red LED flash.
3. The system will confirm correct PIN-code with red and green flashes of LED indicator. If the input
was incorrect, it will be indicated with long red flash. New input can be attempted after 5 seconds.
4. If the system was armed, it will be disarmed after entering the correct PIN-code.
If the system is disarmed and the engine is stopped, after entering PIN-code the system will enter
programming mode.
WARNING!
FACTORY PRESET PIN-CODE IS 1-1-1-1. PLEASE REMEMBER TO CHANGE PIN-CODE,
SEE PAGE 28.
VALET
button
LED
indicator
Summary of Contents for DXL-0050L
Page 42: ...42 Pandora DXL 0050L service security system...
Page 43: ...43 User manual...
