15
User manual
Remote and automatic engine start
The system allows for remote engine start using remote engine start command or automatic
engine start using preconfigured automatic engine start function. Remote start can be used to heat
engine and interior, charge battery or to cool the interior with air conditioning.
Remote and automatic start can only be used when the system is armed.
If the car has manual transmission, automatic start will only occur if programmed neutral
procedure was followed when the car was arming.
Remote and automatic engine start on automatic transmission cars will only occur if transmission
selector lever was left in a ‘P’ position.
When using remote and automatic engine start functions, make sure that the car is secured with
handbrake or some other means of fixating the car on a parking position.
While system is in remote and automatic start mode, it keeps performing all security functions
save for shock sensor, which will have lower sensitivity during engine start and for a short time after
while algorithm adjusts to the new normal. To compensate, motion sensor sensitivity, responsiveness
and range will be increased. If any security zone will be triggered, the engine will be immediately
stopped and alarm mode will be entered. Herewith all immobilizer functions will be activated.
Programmable neutral procedure (for cars with manual transmission)
fixate the car
using a handbrake
leave the car, close the doors
short press
‘engine stop’
ringtone
in 3 sec. the engine will
be stopped, the system
is ready to perform
remote start
OFF
ON
ACC
~~
If you are planning to use remote and automatic engine start on a car with manual transmission,
you will need to perform following actions before arming:
1. While the engine is running, fixate the car with the handbrake and put manual transmission
lever (shift-stick) to the neutral position.
Summary of Contents for DXL-0050L
Page 42: ...42 Pandora DXL 0050L service security system...
Page 43: ...43 User manual...
