16
Pandora DXL-0050L service-security system
2. Turn the key in the ignition lock to the OFF position (the engine should still be running)
and
take it out of the lock.
3. Leave the car, close the doors.
4. Press button to arm the car and lock the doors. On LCD remote the engine operation icon
will be spinning and security mode status icon will light.
5. The engine will be stopped. Now the system is ready to perform remote and automatic engine start.
This procedure ensures that whenever remote start occurs, your car will not move by itself.
Remote engine start
If the system is prepared for remote start, to execute it, press and hold for 3 seconds. Sound
signal will confirm the command, LCD will show crossed out shock sensor icon
and flashing
engine operation icon
signifying preparation to the engine start. In a few seconds, the engine
will be started, the remote will play ‘ENGINE START’ ringtone and show spinning engine operation
icon
.
Engine operation duration depends on system settings – either heating time or threshold temperature
for engine stop.
3 flashes
‘engine
start’ ringtone
press and hold
3 sec.
preparing
to start
engine start
~~
To remotely stop the engine while it performs heating, press and hold for 2 or more seconds.
The engine will be immediately stopped and it will be confirmed by remote playing of ‘ENGINE STOP’
ringtone and engine operation icon
fading.
The remote will give notification 1 minute before designated engine stop,
icon will flash and
‘ENGINE STOP IN 1 MINUTE’ ringtone will play every 10 seconds.
‘engine stop’
ringtone
press and hold
2 sec.
engine stop
~~
‘engine start’
ringtone
~~
Summary of Contents for DXL-0050L
Page 42: ...42 Pandora DXL 0050L service security system...
Page 43: ...43 User manual...
