background image

5

4

USER MANUAL

PANDORA DXL 0110L CAR SERVICE-SECURITY SYSTEM

System features

Base unit

•  Mobile application for Android.

•  «Secret PIN-code» for disarming and disabling immobilizer.

•  Hands Free mode for arming/disarming.

•  Two «Anti-Hi-Jack» algorithms.

•  «Automating arming» mode.

•  «Code Immobilizer» mode.

•  Built-in 2.4 GHz module supports Bluetooth 4.2 LowEnergy.

•  Dialog coding of control commands. 

•  Individual 128-bit encryption key. User can change the key during tag  

 

re-learning procedure.

•  Built-in accelerometer 

•  Built-in integral accelerometer for determining motion and shocks with  

 

adaptive processing algorithm and sensitivity controls.

•  Advanced processing of sensor data, eliminating false alarm possibilities.

•  Firmware updates via built-in micro-USB socket.

Immobilizer tags

•  Dialog coding of control commands.

•  Individual 128-bit encryption key. 

•  Built-in LED indicator.

•  Built-in button to control over security modes.

•  Built-in accelerometer.

* - Availability of this function depends on car make and model

Car security zones

Pandora DXL 0110L service-security system guards following independent 

zones:

•  car doors perimeter

•  front hood triggers

•  trunk triggers

•  ignition trigger

•  brake pedal button pressing

•  triggering of the shock sensor (warning level)

•  triggering of the shock sensor (alarm level) triggering of the motion   

 sensor

•  triggering of the tilt sensor

•  marker lights left on notification when arming*.

System set

Base unit 

1

Immobilizer tag 

1

Cable with VALET button 

1

User installation manual 

1

Personal owner’s card 

1

Beeper (compact sound emitter) 

1

Main cable 

1

Fastening kit 

Packaging 1

Manufacturer reserves the right to change set and construction of the product to improve its 

technological and operational parameters without notification.

Summary of Contents for DXL 0110L


















Reviews: