background image

3

2

USER MANUAL

PANDORA DXL 1100L SERVICE-SECURITY

Pandora DXL 1100L

 is a service and security system designed for motorcycles.

Pandora DXL 1100L

 is developed and produced in Kaluga in the west of Russia on 

a privately owned «Experimental Engineering Factory»

The device was developed by a group of Russian engineers with the highest 

qualification. It includes a number of highly advanced and unique technological, 

software and design solutions.

When building 

Pandora DXL 1100L

 we were using the most up-to-date 

electronics from world’s best manufacturers. The device is built using high-precision 

mounting and control machinery, thus we guarantee highest possible quality, 

reliability and stable technical characteristics for the whole operation period.

Pandora DXL 1100L

 has a cryptographically strong authorization code with 

unique dialog algorithm and individual 128 bit encryption key on every device. 

Experimental Engineering Factory guarantees 100% protection form electronic 

hacking for the whole operation period.

The system is built for your convenience: it’s ergonomic, reliable, has the highest 

security and service characteristics, 3 years unconditional warranty and free service 

and support on the territory of Russain Federation and nearest states. We are happy to 

provide any support we can – feel free to use our online support.

G E N E R A L   I N F O R M A T I O N

It is essential for systems functioning that you read and understand instructions in 

this manual. Note that all radio devices are subject to interference, which could affect 

proper performance.

This device has limited external factors resistance. It should not be subjected to water 
beyond occasional splatter, or operated in temperatures outside -40 to +80° C range

IMPORTANT! Note that this manual describes remote and manual functions 

for the most part. Functionality of the system is vast and would require 

a book-sized manual to fully describe. Instead we use a handy software 

named AlarmStudio that functions as both programming tool and an 

extended installation & functionality manual. It requires Windows and can be 

downloaded at pandorainfo.com

Our website: 

www.pandorainfo.com

Support e-mail: 

support@pandorainfo.com

                          Product is in comformity wiht Electromagnrtic Comparibility
                          Directive EMC/2014/108/EC and R&TTE Directive  1999/5/EC

G E N E R A L   I N F O R M A T I O N

 

WARNING! IT IS STRONGLY ADVISED TO HAVE PROFESSIONAL CAR 

MECHANIC INSTALLING THE SYSTEM. CERTIFIED INSTALLERS ARE RARE 

OUTSIDE RUSSIA, BUT ANY CAR ELECTRONICS INSTALLER SHOULD BE TABLE TO 

INSTALL PANDORA DXL 1100L USING INSTALLATION SCHEME IN THIS MANUAL 

AND ALARMSTUDIO SOFTWARE. MOST FEATURES ARE HIGHLY DEPENDENT 

ON COMPETENT INSTALLATION. OUR SYSTEMS ARE THOROUGHLY TESTED 

FOR QUALITY, SO IF A FEATURE FAILS TO PRODUCE EXPECTED RESULTS, MOST 

LIKELY THE PROBLEM IS IN IMPROPER INSTALLATION.

Summary of Contents for DXL 1100L


























Reviews: