11
10
User manual
Pandora DXL-1700L service-security system
CONTROL OVER SYSTEM VIA PHONE
Call the system’s phone number. When it answers, enter command code.
WARNING!
IF THE CALL IS NOT MADE FROM THE OWNER’S NUMBER, GUEST PIN-CODE
SHOULD BE ENTERED. FACTORY SET GUEST PIN CODE IS 1-2-3-4. AFTER THE
SYSTEM IS INSTALLED, PLEASE CHANGE FACTORY SET PIN-CODE.
Control via speed dial DTMF commands
For example: To have simple access to engine start function, create a new contact in the contact
list of your phone, name it ‘Engine start’, for instance, and add the number in the following format:
+XXXXXXXXXXX,123*,297*, where:
red LED indicator flash.
2. Similarly input the second, third and fourth digit. Every input
will be confirmed with red LED flash.
3. The system will confirm correct PIN-code with red and
green flashes of LED indicator. If the input was incorrect, it will be
indicated with long red flash. New input can be attempted after
5 seconds.
If immobilizer/Antihijack mode is activated:
4. Using VALET button, input PIN-code. Factory preset PIN-code is 1-1-1-1 (4 presses with pauses
for 2 seconds).
5. The system will confirm correct PIN-code with red and green flashes of LED indicator and will
enter programming mode. New input can be attempted after 5 seconds.
6. To switch off immobilizer/Antihijack function, press VALET service button 15 times (pauses
between presses should not exceed 1 second). The LED will be lit green.
7. Input individual PIN-code similar to emergency disarm. The system will confirm correct PIN-
code with 2 short signals of the siren and with red flash of LED.
8. To activate immobilizer/Antihijack function, enter level 15, the system will confirm it with red
flash of LED. Press VALET button once, the system will confirm it with green flash of LED and with 1
short signal of the siren.
For emergency arming when the engine is stopped, press and hold VALET button for 3 seconds.
The system will be armed in 30 seconds.
While there is a countdown, the LED will be lit red.
#
#
1
1
*
*
0
0
9
9
*
*
*
*
9
9
0
0
*
*
7
7
0
0
0
0
*
*
1
1
0
0
0
0
*
*
1
1
2
2
3
3
*
*
Return to previous menu/state
Repeat the last message
Silent arming
Help
0
0
0
0
*
*
Silent disarming
1
1
*
*
Arming
0
0
*
*
Disarming
Event history
Switch on interior microphone
Request GSM account balance
Start the engine/prolong heating
3
3
2
2
1
1
*
*
Stop the engine
3
3
3
3
3
3
*
*
Switch on additional function using F
button via CAN
5
5
0
0
0
0
*
*
4
4
5
5
6
6
*
*
6
6
5
5
4
4
*
*
6
6
6
6
6
6
*
*
9
9
9
9
9
9
*
*
2
2
5
5
8
8
*
*
System information
Request current coordinates
Switch on additional channel
Switch off additional channel
Enable engine blocking
Disable engine blocking
9
9
9
9
8
8
*
*
Disable immobilizer and AntiHiJack
8
8
8
8
8
8
*
*
Enable immobilizer and AntiHiJack
2
2
2
2
2
2
*
*
Disable Hands Free mode
2
2
2
2
3
3
*
*
Enable Hands Free arming
2
2
2
2
4
4
*
*
Enable Hands Free disarming
2
2
2
2
5
5
*
*
Enable Hands Free disarming only with autom. start
7
7
8
8
9
9
*
*
Enable automatic engine start
9
9
8
8
7
7
*
*
Disable automatic engine start
2
2
9
9
7
7
*
*
Call ended
5
5
5
5
1
1
*
*
Enable maintenance/valet mode
(see description below)
1
1
5
5
6
6
*
*
6
6
5
5
1
1
*
*
Switch on preheater
Switch off preheater
5
5
5
5
2
2
*
*
Disable maintenance/valet mode
WARNING!
MAKE SURE THAT PROTECTIVE LAYER ON THE OWNER’S PLASTIC CARD IS IN-
TACT AFTER THE INSTALLATION OF THE SYSTEM. PLASTIC CARD HOLDS INDI-
VIDUAL PIN-CODE.
