background image

Pandora would like to thank you for choosing

our DXL 1920/1930 service and security system

Pandora DXL 1920L/1930L

 – is a premium car service-security system, built for cars with on-board 

voltage of 12V. It is a complex engineering solution which includes car security system, telemetry, 

remote and automatic engine start and various service options, all controlled from your OEM key 

remote, smartphone or online service.

When building 

Pandora DXL 1920L/1930L

 we were using the most up-to-date electronics from 

world’s best manufacturers. The device is built using high-precision mounting and control machinery, 

thus we guarantee highest possible quality, reliability and stable technical characteristics for the whole 

operation period.

 Pandora DXL 1920L/1930L

 has a cryptographically strong authorization code with 

unique dialog algorithm and individual 128 bit encryption key on every device. We guarantee 100% 

protection form electronic hacking for the whole operation period.

The system is built for your convenience: it’s ergonomic, reliable, has the highest security and 

service characteristics, 3 years unconditional warranty and free service and support on the territory of 

Russain Federation and nearest states. We are happy to provide any support we can – feel free to use 

our online support.

This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter, or operated in

temperatures outside -40 to +80° C range

IMPORTANT! Note that this manual describes remote and manual functions for the most 

part. Functionality of the system is vast and would require a book-sized manual to fully describe. 

Instead we use handy software named AlarmStudio that functions as both programming tool and 

an extended installation & functionality manual. It requires Windows and can be downloaded at 

pandorainfo.com

Our web site: 

www.pandorainfo.com

Customer support: 

support@pandorainfo.com

Product is in conformity with Electromagnetic Compatibility 

Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC

WARNING! IT IS STRONGLY ADVISED TO HAVE PROFESSIONAL CAR MECHANIC IN-

STALLING THE SYSTEM. ANY CAR ELECTRONICS INSTALLER SHOULD BE ABLE TO 

INSTALL PANDORA DXL 1920L/1930L USING INSTALLATION SCHEME IN THIS MAN-

UAL AND ALARMSTUDIO SOFTWARE. MOST FEATURES ARE HIGHLY DEPENDENT 

ON COMPETENT INSTALLATION. OUR SYSTEMS ARE THOROUGHLY TESTED FOR 

QUALITY, SO IF A FEATURE FAILS TO PRODUCE EXPECTED RESULTS, MOST LIKELY 

THE PROBLEM IS IN IMPROPER INSTALLATION

Summary of Contents for DXL 1930L






















Reviews: