13
12
U S E R M A N U A L
P A N D O R A D X L 1 9 2 0 L / 1 9 3 0 L C A R S E R V I C E - S E C U R I T Y S Y S T E M
Enabling radio tag:
LED
indicator will light red after entering the programming level. The system will wait for action.
Press
VALET
button once to enable radio tag. The system will confirm enabling with one short sound
signal of a siren and a green
LED
light. After that the system will return to the programming menu.
CONTROL OVER THE SYSTEM VIA A PHONE
Call the system’s phone number. When it answers, enter command code.
WARNING! IF THE CALL IS NOT MADE FROM THE OWNER’S NUMBER, GUEST PIN-
CODE SHOULD BE ENTERED. FACTORY SET GUEST PIN CODE IS 1-2-3-4. AFTER THE
SYSTEM IS INSTALLED, PLEASE CHANGE FACTORY SET PIN-CODE. 1-2-3-4.
DTMF – commands
For example:
To have simple access to engine start function, create a new contact in the contact
list of your phone, name it “Engine start“, for instance, and add the number in the following format:
+XXXXXXXXXXX,123*,297*
where “+XXXXXXXXXXX“ – the system phone number,
“,’ - pause is a feature of the phone (can be displayed as the “P“, see the instructions of the phone),
“123*“ - remote engine start DTMF command,
“297*“ - end call DTMF command.
Contact can be added as a speed dial to any of the free button.
To have simple access to engine start function a phone other than the main owner’s phone, create
contact in the following format:
+XXXXXXXXXXX,1234,123*,297*
where “1234“ – guest PIN-code.
Enable/Disable maintenance mode
1. Call the system number. Wait for answer.
2. To enable maintenance mode, dial “Enable maintenance mode“ DTMF command
551*
(the
ignition should be switched on, radio tag should be in rage if immobilizer/Anti-Hi-jack mode is
active)
3. Enter the “Secret PIN-code“ that is located on the owner’s plastic card.
4. To disable maintenance mode, dial
552*
DRMF command.
Voice help
The system has voice help menu. During voice call to the system, dial
9*
and listen to the information
about system control commands. To end session, hang up the phone.
Repeat the last message
To repeat any message, press
*
during a voice call to the system
Arming/disarming
1. Call the system number. Wait for answer.
2. Dial
1*
to arm, and
0*
to disarm
For silent arming dial
10*
or
00*
for silent disarming
3. The system will confirm arming/disarming.
Enabling/disabling automatic engine start
Pandora system has function of promptly disabling automatic engine start.
1. Call the system number. Wait for answer.
2. Dial
987*
to disable all automatic engine starts or
789*
to enable all automatic engine starts.
3. The system will confirm execution
To end session, hung up the phone
#
#
9
9
*
*
*
*
9
9
0
0
*
*
1
1
0
0
0
0
*
*
1
1
2
2
3
3
*
*
Return to previous menu state
Repeat the last message
Silent arming
Help
0
0
0
0
*
*
0
0
1
1
*
*
Silent disarming
1
1
*
*
Arming
0
0
*
*
Disarming
Event history
5
5
1
1
*
*
Tow truck mode
Request GSM account balance
Start the engine/prolong heating
3
3
2
2
1
1
*
*
Stop the engine
3
3
3
3
3
3
*
*
Switch on add. function using F via CAN
5
5
0
0
0
0
*
*
4
4
5
5
6
6
*
*
6
6
5
5
4
4
*
*
6
6
6
6
6
6
*
*
9
9
9
9
9
9
*
*
2
2
5
5
8
8
*
*
System information
Request current coordinates
Switch on additional channel
Switch off additional channel
1
1
5
5
6
6
*
*
6
6
5
5
1
1
*
*
Switch on engine preheater
Switch off engine preheater
Enable engine blocking
Disable engine blocking
9
9
9
9
8
8
*
*
Disable immobilizer tag
8
8
8
8
8
8
*
*
Enable immobilizer tag
2
2
2
2
2
2
*
*
Disable Hands Free mode
2
2
2
2
3
3
*
*
Enable Hands Free arming
2
2
2
2
4
4
*
*
Enable Hands Free disarming
2
2
2
2
5
5
*
*
Enable Hands Free disarming only with autom. start
7
7
8
8
9
9
*
*
Enable automatic engine start
9
9
8
8
7
7
*
*
Disable automatic engine start
2
2
9
9
7
7
*
*
Call ended
5
5
5
5
1
1
*
*
Enable maintenance mode (see description below)
5
5
5
5
2
2
*
*
Disable maintenance mode
WARNING!
ENABLE REMOTE START ONLY IF YOUR LOCAL LEGISLATION ALLOWS DRIVERLESS
CARS TO HAVE WORKING ENGINE.
