PA N D O R A T R A C E R
U S E R A N D I N S TA L L AT I O N MA N UA L
14
15
CONTROL USING SMS COMMANDS
The tracker can receive and execute SMS commands. The tracker
receives SMS messages and executes commands in “Autonomous
beacon” and «Constant connection» modes. To protect the tracker
against unauthorized messages each command must contain the
Service PIN-code - ХХХХ (factory default value is 1-1-1-1).
w
arNiNg
! i
t
’
s
stroNgly
recommeNded
to
chaNge
the
default
value
of
the
s
ervice
piN-
code
.
ХХХХ*PIN*YYYY*
– Changing the “Service PIN-code”. This command
can be executed only from the phone number that has been previously
programmed in the tracker memory
ХХХХ
– current PIN-code (default
value is 1-1-1-1),
YYYY
– new PIN-code.
XXXX*666*
– Switching on the “Tracking mode”. The tracker will
activate the “Tracking mode” for a previously specified period or until a
command to switch it off would be received.
ХХХХ*999*
– Switching off the “Tracking mode”.
ХХХХ*ALARM*YYY*
– Setting periodicity of communication.
YYY
–
hours value from 001 to 168.
ХХХХ*500*
– Request current location.
ХХХХ*100*
– Request balance of the SIM-card.
w
arNiNg
! m
ost
mobile
operators
store
uNdelivered
messages
for
No
more
thaN
24
hours
.
