AT-HDVS-CAM-HDMI
40
RTP Multicast Page
These settings affect the main stream, which is the primary video feed and provides the highest quality video.
Sub Stream is the secondary video feed and provides a lower quality video stream. This stream is used to stream
video to computers and mobile devices.
Enable
Click this check box to enable the main stream / sub stream. When a stream is enabled, the check box will be
checked.
Protocol Type
Click this drop-down list to set the protocol.
Main Stream / Sub Stream
Configuration and Management Interfaces
Protocol
Description
RTP
Real Time Protocol
TS
Transport Stream (MPEG-TS)
Multicast Address
Specify the multicast IP address of the stream in this field.
Multicast Port
Specify the port in this field.
Access Method
Displays the fully-qualified URL of the stream, based on the above settings.
Save
Click this button to commit changes.
Cancel
Click this button to abort changes.