AT-HDR-SW-51
18
Device Operation
Selecting the Input
Input selection can be performed on the front panel, through the built-in web server, or by executing a command
over Telnet. Refer to the API document for the full set of available commands.
Using the Web Server
Using the Front Panel
1. Log in to the web server.
2. Click
A/V Settings
in the menu bar.
3. Click the
Input Selection
drop-down list and select the desired input.
1.
Press and release the
INPUT
button on the front panel.
2. Each time the
INPUT
button is pressed, the AT-HDR-SW-51 will advance to the next input. The active input will
be displayed by a blue indicator light, as shown below.
3. If the
INPUT
button is pressed when
HDMI 5
is the active input, then HDMI 1 will become the active input.
AT-HDR-SW-51
POWER
INPUT
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
L
R
S/PDIF
1
2
3
4
5
HDMI IN
HDMI OUT
LAN
FW
DC 5V
+
-
RS-232
RX TX
AUDIO OUT
INPUT button
Active Input indicator
