AT-OME-MS42
52
The AT-OME-MS42 includes a built-in web server. Atlona recommends that the web server be used to set up the
AT-OME-MS42, as it provides intuitive management of all features. Follow the instructions below to access the
webGUI.
1.
Make sure that an Ethernet cable is connected between the LAN port on the AT-OME-MS42 and the network.
2.
Launch a web browser and enter the IP address of the unit. If the default static IP address is being used, enter
192.168.1.254.
3.
The AT-OME-MS42
Login
page will be displayed.
Introduction to the Web Server
4. Type
admin
, using lower-case characters, in the
Username
field.
5. Type
Atlona
in the
Password
field. This is the default password. The password field is case-sensitive. When the
password is entered, it will be masked.
6.
Click the
Submit
button or press the ENTER key on the keyboard.
Configuration and Management Interfaces
