AT-UHD-CAT-XX
10
Commands
InputStatus
Event-driven API command. Feedback indicates if a source device is present, based on both the HDMI 5V and TMDS
lines. If a source is detected on the input, then a 1 will be returned. Inputs with no source connected will return a 0.
Example
Syntax
InputStatus X
Parameter
Description
Range
X
Returned result (input)
0 ... 1
If a PC is connected to the HDMI input, then the following is true:
a. The control system, using either RS-232 or Telnet, will receive
InputStatus 1
.
b. Disconnection of the PC will return
InputStatus 0
.
User polling can be performed by using the following:
InputStatus
.
IPCFG
Displays the current network settings for the unit.
Example
IPCFG
This command does not require any parameters
Syntax
IPCFG
Feedback
Mac Addr: B8:98:B0:05:DF:F7
IP Addr: 10.0.1.101
Netmask: 255.255.255.0
Gateway: 10.0.1.1
Telnet Port: 23
HTTP Port: 80