Installation Guide
AT-VTP-800
7
Verify your PIN
554361
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
1
2
3
4
5
6
7
8
0
9
CANCEL
VERIFY
URL
GATEWAY SETTINGS
TOUCH SCREEN SETTINGS
System Volume
Screen Brightness
0.0.0.0
REFRESH PAGE
CLEAN SCREEN
CLOSE
ABOUT VELOCITY
ADVANCED SETUP
2
Select Advanced Setup.
3
Type in the PIN. Default PIN is 554361.
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
1
2
3
4
5
6
7
8
0
9
CANCEL
SAVE PIN
Set Configuration PIN
(Note: Once a pin is set, it will be required to edit settings going forward)
(Enter a blank pin to remove)
ADVANCED SETTINGS
Set Static IP
IP Address
Subnet Mask
Default Gateway
DNS Server
75.75.75.75
10.0.0.1
255.255.255.0
10.0.0.123
URL
Gateway Settings
Device Settings
Touch Screen LAN Configuration
0.0.0.0
Alternate URL
0.0.0.0
Alias
Velocity Touch Panel 800
SAVE
FACTORY RESET
CLEAR CACHE
SCAN NETWORK
CANCEL
SET PIN
ADVANCED SETTINGS
Set Static IP
IP Address
Subnet Mask
Default Gateway
DNS Server
75.75.75.75
10.0.0.1
255.255.255.0
10.0.0.123
URL
Gateway Settings
Device Settings
Touch Screen LAN Configuration
0.0.0.0
Alternate URL
0.0.0.0
Alias
Velocity Touch Panel 800
SAVE
FACTORY RESET
CLEAR CACHE
SCAN NETWORK
CANCEL
SET PIN
Cache has been successfully cleared. Press
OK to restart.
OK
ADVANCED SETTINGS
Set Static IP
IP Address
Subnet Mask
Default Gateway
DNS Server
75.75.75.75
10.0.0.1
255.255.255.0
10.0.0.123
URL
Gateway Settings
Device Settings
Touch Screen LAN Configuration
0.0.0.0
Alternate URL
0.0.0.0
Alias
Velocity Touch Panel 800
SAVE
FACTORY RESET
CLEAR CACHE
SCAN NETWORK
CANCEL
SET PIN
Changing advanced settings requires application restart.
OK
Within the advanced settings, all the touch pad settings can be changed or reset.
Gateway Settings
-
a If the gateway IP is known, it can be typed into the
URL
field.
b If the gateway IP is unknown, press the
Scan Network
button to search for and add
the gateway.
Device Settings
- The touch pad can be renamed for easier syncing with Velocity. Type the
name into the
Alias
field.
Touch Screen LAN Configuration
- The current IP settings will display in these fields. To
switch to a static IP, select the
Set Static IP
slider, fill in the IP information, and press Save.
Set PIN
- The default PIN of 554361 can be changed to a new pin by pressing the
Set PIN
button. Type the new PIN in and press Save PIN.
Clear Cache
- Press the
Clear Cache
button to release the current cache of the VTP. Press
the
OK
button to verify.
Factory Reset
- Press the
Factory Reset
button to clear all the settings and start the touch
pad set up again. Press the
OK
button to verify.
Advanced Settings
Once the touch pad has been set up, the settings can be changed or reset only through the
advanced settings.
1
To access the settings, swipe from the left side of the touch pad to the right.
