AT-OMNI-324
12
Basic Operation
To unpair one extender from the other, press and hold the
PAIRING
button, on either of the connected units, for
more
than 10 seconds, then release.
Unpairing an Extender
Using Velocity™
The following section provides instructions on pairing AT-OMNI-311 units with AT-OMNI-324 units using the Atlona
Velocity Control Software. Familiarity with the Velocity software is assumed. Refer to the
Atlona Velocity User
Manual
for more information, if necessary.
1.
Launch a web browser and enter the IP address of Velocity, in the address bar.
2. Enter the required login credentials.
3. Click the
Login
button.
4. The Velocity Dashboard will be displayed.
5.
Click the icon, in the upper-left corner, to display the fly-out menu.
Click to display fly-out menu
6.
Click
Sites
in the menu bar to expand the list
of buildings and rooms.
7. Click the desired room from the list.
In the example on the right, a set of units have
been set up in a room called
Omni 311 324
within
Building 1
.
Refer to the
Velocity User Manual
for
instructions on creating rooms and adding
devices to rooms.
