AT-OMNI-324
14
Basic Operation
Creating the Unpair Macro
1. In the
Room Macros
screen, click the
+
icon, in the upper-right corner of the screen.
2. Enter the name of the macro in both the
Name
and
Macro Commands
text field. The name of the macro should
be descriptive of what option is being performed.
3. Click the
+
icon to display the macro configuration dialog.
4. Click the
Device
drop-down list and select one of the device from this list. Since the “Unpair” macro will
disconnect the two units from one another, either the AT-OMNI-311 or AT-OMNI-324 can be selected from this
drop-down list. In this example, the AT-OMNI-324 is selected.
Macro Configuration icon
5. Click the
Command
drop-down list and select
Remove All Pairings
.
6.
Repeat steps 3 through 5: when repeating theses steps, select the AT-OMNI-311 from the
Device
drop-down
list.
7. Click the
Save
icon in the top-right portion of the
Room Macros
bar.
