AT-OMNI-324
17
Basic Operation
1. In the
Room Macros
screen, click the
icon, in the upper-right corner of the screen.
2. Enter “Unpair” for both the
Name
and
Macro Commands
text field.
3. Click the
+
icon to display the macro configuration dialog.
4. Click the
Device
drop-down list and select one of the devices from this list. Since the “Unpair” macro will be
disconnecting a total of three units from one another, the “Unpair” macro will contain a total of three commands.
In this example, the AT-OMNI-324 is arbitrarily selected.
5. Click the
Command
drop-down list and select
Remove All Pairings
.
6.
Repeat steps 3 through 5, selecting the second AT-OMNI-324 and then the AT-OMNI-311 from the
Device
drop-
down list. When completed, the “Unpair” macro should appear as follows:
+
