LABELING EXERCISES
33
Exercise 4
Create serialized wire markers with heat shrink tubing
•
Step 1: Insert a heat shrink tubing label cassette such as H000X044F1C
•
Step 2: When prompted, select New Blank File. Save previous label if
necessary.
•
Step
3:
Type
WIRE
•
Step 4: Press INSERT key
•
Step 5: Press down arrow key once to highlight Serial
•
Step
6:
Press
•
Step 7: Press right arrow key
•
Step 8: Type 1 for Start value
•
Step 9: Press
•
Step 10: Press right arrow key
•
Step 11: Type 3 for End value
•
Step
12:
Press
twice
•
Step 13: Press PRINT
Results:
Hint:
The Serial tool allows numeric or alphabetic
serializations.
You can choose any increment from 1 to 99,
print multiple copies of a series, and even
collate the copies of the series items.
Heat shrink tubing can be partially cut to create
a strand of individual markers. The Cut/Pause
function in the Setup Menu will pause a print
job between each consecutive label for cutting.
WIRE1
WIRE1
WIRE2
WIRE2
WIRE3
WIRE3
WIRE1
WIRE1
WIRE2
WIRE2
WIRE3
WIRE3
…Using Cut/Pause
Function
Heat Shrink
Serialization…
