INSTALLATION INSTRUCTIONS
For Technical Assistance, Call: 800-777-3300
Mounting Hole Location - Top*
6.00” (152.4mm)
12.75” (323.9mm)
0.38” - 0.50” (9.7mm - 12.7mm) dia
6.25” (158.8mm)
27.54” (699.5mm)
1.00” (25.4mm)
* If the N
ET
-A
CCESS
Network Cabinet was supplied without the four (4) required pre-drilled mounting holes, the installer must drill four (4) 0.38” - 0.50” dia
Front
holes at the locations specified above.
