E-mail:
cs@panduit.com
Fax:
(708) 444-6993
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
INSTALLATION INSTRUCTIONS PN420E
Page 2 of 2
3. (Optional)
To use the optional remote management interface, install the
DPoE
Element Manager software, included on the enclosed CD, on a
computer that supports network communication to the
DPoE
Compact
8 Midspan. Using a patch cord, connect the management port on the
rear of the power midspan to an Ethernet switch. A DHCP server must
be on the network.
The latest version of software products may be downloaded at
www.panduit.com/managednetworksolutions
4.
To supply power to the
DPoE
Compact 8 Midspan using a
DPoE
Power Supply (
PANDUIT
part no. DPOEPWRB120Y), simply mate the
attached power connector to the power midspan and then connect AC
power to the
DPoE
Power Supply. To supply power using the rack
mounted
DPoE
Power System (
PANDUIT
part no. DPOEPWRCU
with a DPOEPWRR500 or DPOEPWRR1250), remove power from
the port on the
DPoE
Power System (remove the fuse for the port).
Insert the provided 10' power harness into the panel power connector.
Connect the other end of the harness to the appropriate port on the
DPoE
Power System. Butt splices are provided to extend the power
harness (refer to user guide for maximum length). Then apply power
to the port by inserting the appropriate fuse in the
DPoE
Power
System.
From Network
Notes:
1.
DPoE
Compact 8 Midspan cannot be used for analog or non-Ethernet devices.
2.
PANDUIT
S
TRUCTURED
G
ROUND
Kits for Data Center Rack Grounding
can be used to properly ground
PANDUIT
N
ET
R
ACK
Rack Systems and racks from most other manufacturers.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
4. Only trained and qualified service personnel should service
DPoE
Compact 8 Midspans.
5. Before installing or servicing the
DPoE
Compact 8 Midspan or communication wiring, be aware of the hazards with the associated electrical circuitry.
ATTENTION:
Observe precautions for handling electrostatic sensitive electronic devices
when installing this product. Ensure that you are properly grounded with a
wrist strap or equivalent while making connections to the product. Never
make any connections to the product when power is being applied.
DPoE
European (EMC) Warning:
Product is not intended for use in a residential environment. Use of this
product in residential areas may cause electromagnetic interference.
