11
ES2P
PDU INSTALLATION MANUAL
Vertical (0U) PDU– Single Installation
A single vertical unit can be installed with the outlets facing the center (A) The pictures
below illustrate these installation methods.
(A)
NOTE:
The above installation methods are true for all vertical models. Those units
can only mount on its side with outlets facing the back of the rack.
Vertical (0U) PDU– Two or More Installation
For two full-height (in a 42U/45U/48U rack), two mid-height (in a 42U/45U/48U rack),
or four half-height (in a 42U/45U/48U rack) vertical units to be mounted on one side
of the rack, all units must be installed with the outlets facing in towards the center of
the rack.
(A)
(B)
(C)
NOTE:
(A) Two full-height PDUs with outlets facing in towards the center of the rack;
(B) Two mid-height PDUs with outlets facing in towards center of the rack;
(C) Four half- height PDUs with outlets facing in towards center of the rack.
