For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018
FS136
Page 1 of 6
OptiCom Adapter for HD Flex Cassettes
Part Number(s): FLEX-OPTI-1RU
Rear Insert
Front Insert
Thumb Latch
1. REMOVING FROM PACKAGING AND PREPARING FOR INSTALLATION
1.1 Remove FLEX-OPTI-1RU from individual carton and bag. Figure 1 displays how FLEX-OPTI-1RU will be assembled after
being removed from packaging.
Figure 1:
FLEX-OPTI-1RU
removed from
packaging
1.2 The FLEX-OPTI-1RU is made up of 2 individual components, the rear insert and the front insert. To properly install the
FLEX-OPTI-1RU, the rear insert must be separated from the front insert. To separate the rear insert, press down on the thumb
latch and slide the rear insert away from the front insert.
Figure 2:
Showing where
the thumb latch is
located and how
to push down on
the latch and
direction to slide
the rear insert
Push here
Slide rear
insert this
direction
Rear Insert
Front Insert
Figure 3:
Front and rear
insert separated
from one another
