For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
FS066
Page 1 of 4
Fiber Optic Connector Enclosures for Japan
Part Numbers: FMT1J, FMT1J4HWBUDSC, FMT1J6HWBUDSC, FMT1J8HWBUDSC,
FMT1J12HWBUDSC, FMT2J, FMT2J24HWBUDSC, FMT2J16HWBUDSC,
FMT2J18HWBUDSC, FMT2J20HWBUDSC
FMT1J
Contents:
4 - #12-24 Screws
1- Splice Tray with Cover
(FMT1J, FMT1J6HWBUDSC
and FMT1J12HWBUDSC)
Bracket
Enclosure
Cover
Splice tray
Splice tray
cover
Strain relief
Fiber laser beam
warning label
Fiber Caution Label
1RU grommet
Fiber optic cable is sensitive to excessive pulling, bending and crushing forces. Consult the manufacturer’s cable specification sheet for
the specific cable in use.
Follow TIA/EIA 568-A, 569, 606, and 607 installation guidelines where applicable.
DANGER: UNMATED CONNECTORS MAY EMIT INVISIBLE LASER RADIATION. DO NOT LOOK DIRECTLY INTO THE END OF THE
CONNECTOR, DO NOT INSPECT WITH MAGNIFYING DEVICES. MAINTAIN CAP ON UNMATED CONNECTORS.
CAUTION:
Grounding lug
Adapter panel
(FAP3HWBUDSC shown)
1 - Enclosure
4 - Strain Relief
2 - Brackets
2 - Short Grommets (FMT1J)
2 - Long Grommets (FMT2J)
FMT1J6HWBUDSC
FMT1J12HWBUDSC
M5 black oxide nut
and flat washer
Wire retainer
Cable Tie
M5 screw
with flat washer
M6 screw
#12-24 screw
FMT1J4HWBUDSC
FMT1J8HWBUDSC
FMT2J
FMT2J24HWBUDSC
ASSEMBLY
(FMT1J shown)
FMT2J20HWBUDSC
FMT2J18HWBUDSC
FMT2J16HWBUDSC
4 - Grounding Lug
4 - M6 Screws
4 - M5 Screws with Flat Washers
4 - M5 Black Oxide Nut & Flat Washer
8- PLT2S Cable Tie
1 - Splice Tray without Cover
(FMT1J12HWBUDSC)
1 - Fiber Caution Label
1 - Fiber Laser Beam Warning Label
5 - Wire Retainers
