INSTRUCTIONS CM698
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
techsupport@panduit.com
Phone
:
866-405-6654
www.panduit.com
Page 4 of 4
Step 5: 3RU Equipment Mounting Bracket Installation
5.1 Locate and install 3RU Equipment Mounting Brackets. Either Cage Nut cutouts or #12-24 tapped mounting holes
can be used; brackets are reversible. Brackets mount in vertical, horizontal, or 45º diagonal positions.
5.2 Depending on bracket orientation, use number of M6 hex head screws listed below (use 10mm socket wrench).
5.3 Install brackets in pairs in mirrored locations on left and right sides of enclosure.
3RU Equipment
Mounting Bracket
VERTICAL ORIENTATION
[2] - M6 Hex Head Screws
3RU Equipment
Mounting Bracket
HORIZONTAL ORIENTATION
[3] - M6 Hex Head Screws
3RU Equipment
Mounting Bracket
45
º
DIAGONAL ORIENTATION
[2] - M6 Hex Head Screws
3RU Equipment
Mounting Brackets
INSTALL IN PAIRS
M6 Hex Head Screws
(use 10mm socket wrench)
