INSTRUCTIONS CM315B
For Technical Support: www.panduit.com/resources/install_maintain.asp
Cable Routing
Cable must be routed with an adequate slack loop to prevent cable damage. Route cable to point 1 secure to tie down with a
T
AK
-T
Y
. Next
route cable across the bottom of the enclosure to point 2 secure to tie down with a
T
AK
-T
Y
.
Route to the desired patch panel after securing
the cables with a T
AK
-T
Y
at point 3 or 4.
Point 2
Point 1
Point 4
Point 3
Cables Extend
to Patch Panel
Page 3 of 7