PAT1M / PAT1.5M OPERATION MANUAL
PAT1M/PAT1.5M: PA22222A01_03
Page: 2 of 36
Dec., 2007
PDM DISPENSER
The PDM Dispenser controls the PAT1M and PAT1.5M Tool operation. The dispenser has an electronic display that
provides a step-by-step menu for feature selections and helps to identify errors to reduce downtime. The display also
functions in conjunction with the audible alarm, providing the operator with the specific status of certain malfunctions,
such as: Dispenser jam, Tie in hose, Tie in tool, etc. Each message is explained in the
Error Messages, Functional
Messages, or Functional Troubleshooting Checklist
sections. The dispenser includes a resettable counter that can
record tie counts for production runs and maintenance intervals. A carrier strip scrap bin is also included to collect
the carrier strip (remaining scrap as the cable ties are detached from the continuous strand).
Overall System (Dispenser w/scrap bin, Reel
Mount, and Cable Tie Reel):
WIDTH:
23.2" (589 mm)
DEPTH:
15.6" (396 mm)
HEIGHT:
28.7" (729 mm)
WEIGHT:
53.3 lbs. (24,2 kg)
Dispenser alone:
WIDTH
18.6" (473 mm)
DEPTH:
15.6" (396 mm)
HEIGHT:
8.4" (213 mm)
WEIGHT:
42.6 lbs. (19,3 kg)
PHM1 / PHM2 / PHM3 / PHM4 FEEDER HOSES
The PHM Feeder Hose connects the tool to the dispenser with quick connect couplings on both hose ends. The
ends are interchangeable, allowing either end to be connected to the tool or the dispenser. The feeder hose allows a
single cable tie to be conveyed (blown) from the dispenser, through the hose, to the tool, each cycle.
PHM HOSE
LENGTH
WIDTH
HEIGHT
WEIGHT
PHM1
1 m (3.3 ft)
0.8 lbs. (0,35 kg)
PHM2
2 m (6.6 ft)
1.2 lbs. (0,54 kg)
PHM3
3 m (9.8 ft)
1.6 lbs. (0,73 kg)
PHM4
4 m (13.12 ft)
1.58" (40 mm)
1.99" (51 mm)
1.9 lbs. (0,86 kg)
electronic components distributor
