© Panduit Corp. 2018
QUICK GUIDE SERVICE DOCUMENT
PAT4.0
Family
PA28677A01_01
Page: 3 of 4
2-2018
Cleaning the Dispenser Exit Sensor Lens
Disconnect the PHM Transfer Hose from the PDM4.0 Dispenser. Dampen one end of a cotton swab with isopropyl
alcohol and insert the dampened end of the cotton swab into the dispenser transfer tube about 1.5" (38 mm) and
gently move the cotton swab in and out, against the top and bottom walls of the transfer tube until clean. Reconnect
the transfer hose to the dispenser and resume operation.
Touch Screen Calibration
Touch screen calibration may be required due to changes in environment conditions and variations in resistance
coating over time thru wear. Environmental conditions such as temperature and humility can alter the resistance
characteristics therefore, affecting the position measurements of the touch screen.
Tap the touchscreen display 20 times within 4 seconds in a non- button area to activate calibration mode.
Calibration mode is signaled by a long beep from the display buzzer preceding a solid blue screen. Click "X"
positions on the touch screen to calibrate. When the calibration is complete, the system will return to the "Ready"
screen.
Recommended Spares, Kits, and Service Tools for PAT4.0 Tool Systems
The following Spares, Kits, and Service Tools shown in the first column are orderable parts for the PAT4.0 Family
Tool Systems. It is recommended to have 1 of each of these items on-hand for every 1 – 3 PAT4.0 systems as
they comprise of replacements for common wear items and associated hardware needed to maintain long-term
operation of the system.
SPARES, KITS,
SERVICE TOOL
PART NUMBER
DESCRIPTION
ASSOCIATED
TOOL OR
ACCESSORY
REFERENCE
COMPONENTS
FOUND IN KITS
EST LIFE CYCLES
AND COMMENTS
PHM1, 2, 3, or 4)
FEEDER HOSE
PAT4.0 System
----
200,000
WT23231D01
LH Coupling
PHM3
(or other 1, 2, or 4)
----
Damaged if dropped
or pried on
WT23369B01
RH Coupling
PHM3
(or other 1, 2, or 4)
----
Damaged if dropped
or pried on
WT28075A01
LOGIC
HARNESS KIT
PDM4.0
WT27506D01
AS NEEDED
WT28069A01
ROTARY
RECEIVER KIT
PDM4.0
WT27449D01
WT27473B01
CA32075A01
CA27696A01
WT27498B01
CA20787A01
CA21590A01
AS NEEDED
WT28066A01
AIR HOSE KIT
PDM4.0
CA27704A01
CA27705B01
AS NEEDED
WT28067A01
CARRIER
BLADE KIT
PDM4.0
CA20953A01
WT22988B02
AS NEEDED
WT28068A01
CUTTER
BLADE KIT
PDM4.0
WS18385B02
CA21182B01
AS NEEDED
KNBPDM
PDM4.0
HARDWARE KIT
PDM4.0
----
AS NEEDED
(Misc. Parts – Screws,
Springs, Nuts, Etc.)
KNBPAT
PAT4.0
HARDWARE KIT
PAT1M4.0,
PAT1.5M4.0,
PAT1M4.0-BT,
PAT1.5M4.0-BT
----
AS NEEDED
(Misc. Parts – Screws,
Springs, Nuts, Etc.)
