Page: 1 of 4
PATMBM4.0
PA28894A01
Rev. 01 1-2018
PATMBM4.0 BENCH MOUNT OPERATION INSTRUCTIONS
FOR USE WITH: PAT1M4.0, PAT1.5M4.0, PAT1M4.0-BT & PAT1.5M4.0-BT
AUTOMATIC CABLE TIE INSTALLATION TOOL SYSTEMS
Panduit Corp. 2018
Original Instructions
INTRODUCTION
The PATMBM4.0 Bench Mount allows hands-free operation, actuation and 90° pitch adjustment of the installed
tool. The tool is mounted in the PATMBM4.0 so the work can be brought to the tool. Depressing the foot pedal
then actuates the tool. Follow the step-by-step instructions below.
WARNING: SAFETY GLASSES MUST BE WORN AT ALL TIMES, BY ALL
PERSONNEL WITHIN TEN FEET OF ANY PART OF THE
SYSTEM
.
FIG 01
