© Panduit Corp. 2018
OPERATION MANUAL
PES400
ENGLISH
PES400: PA28981A01_01
Page: 29 of 46
4-2018
Figure 23
(LOOKING DOWN INTO PES400)
4.2.11 External Hopper Adjustment
a.
See
Table 1
for proper divider/insert combinations.
b.
For plates with height 2.12” (54mm) or greater, remove divider.
c.
For all plate widths longer than 1.72” (43mm), place the divider tabs into the
slot matching the desired plates [
Figure 24
]. Ensure divider is vertical.
d.
For short plate widths 1.72” (43mm), after divider placement, drop the
matching short plate insert into the space between the divider and the
hopper wall.
