LOADING LABELS
Follow these steps to properly load labels into
the PTR3E:
1. Open the
Top Access Door
by
swinging it up and to the left. Open
the
Side Access Door
by
swinging it to the rear of the
printer.
2. Open the
Print Head Assembly
by pushing the
Head Latch
toward the rear of the printer. The
Print Head Assembly
is
spring-loaded
and
will
automatically open as soon as the
Head Latch
is disengaged.
3. Loosen the
Label Edge Guide
and push it to the outside of the
printer to give the maximum label
width.
4. Remove the
Label Roll
Retainer
.
11
Section 2. Installation
Top Access Door
Side Access
Door
Label Roll
Retainer
Label Hold Down
Label Guide
Sensor
Assembly
Label
Edge
Guide
Print Head
Head Latch