SMARTZONE UPS USER MANUAL
42
Screen #
DC VRLA Settings
Content display
S-09A
BYPASS Enable setting
(ON, OFF)
The default Bypass Enable setting is ON. This allows the UPS to switch to the
Bypass State if it needs to.
S-09B
BYPASS Setting
(ON, OFF)
To disable the bypass, set this to OFF.The UPS will not be allowed to transition to
the Bypass State under any circumstances.
Double Conversion Li UPS
These UPS units are for the European market only.
The double conversion Li UPS has eight Setup pages. Remember that scrolling down
through the 8
th
Setup page will automatically save any settings changed during the
Setup session and transition back to the Monitor Operation mode.
The following table shows an example and description of all 8 setup pages in the double
conversion Li UPS unit.