SMARTZONE UPS USER MANUAL
40
the user to transition to other pages. Pressing the three horizontal bars takes the user to
a Status Menu page. Refer to the
section below. For a functioning
UPS unit, the Main State will be replaced with the current operating state of the UPS.
Pressing on the Login location allows the user to login into the UPS with specific
credentials that were previously entered into the system. The three icons and numbers
to the left of the Login are the current Critical Alerts, Warning Alerts, and Events on the
system. Pressing on this location transitions to the Current Alarm page. Refer to the
The remainder of the page provides a block diagram of the system, highlighting the
current UPS working state. The examples in
Normal mode working in the Normal state (on-line double conversion). Pressing on the
Input/Mains, Bypass, Battery, or Output block is a shortcut to the detailed page for that
function.
From the home page the down arrow transitions to the dashboard page (refer to
) and the up and over arrow transitions to the Status Menu page (refer to
Dashboard Page
This page provides all the power measurements consolidated on a single page. For
single phase units only one measured value will be in each category.
Press the up arrow to go back to the previous page. Press the up and over arrow to go
to the home page. Press the HOME icon to go to the Status Menu page.
Figure 17: Dashboard Page (3-Phase UPS)
